Design Decor 3

Indore, Madhya Pradesh

GST No.-23EUSPS5025M1ZY

Decorative Glass Films

Wholesale Trader of a wide range of products which include decorative glass film.

Decorative Glass Film

Get Best Quote

Request Callback

₹ 30 / sq ft Get Latest Price

Design Type	Plain Frosted
Privacy Level	High
Micron Thickness	70 µm
Finish	Frosted
Application Area	Office Partition, Bathroom Glass, Door Glass, Cabin Glass, Home Windows
Base Material	Vinyl
Roll Width	48 in
Roll Length	10 m
Adhesive Type	Self Adhesive
UV Rejection	80%

Minimum order quantity: 40 sq ft

Frosted film is a type of adhesive or non-adhesive plastic film, usually made from PVC (polyvinyl chloride) or PET (polyester), that has a translucent, etched, or sandblasted appearance. It is applied to glass or acrylic surfaces to create a frosted, matte, or opaque effect while still allowing light to pass through.

🧪 2. Material Composition

Component	Description
Base Film	PVC or PET, 50–200 µm thickness, flexible and durable
Surface Finish	Etched/matte/frosted texture applied via embossing or chemical treatment
Adhesive (for self-adhesive types)	Solvent-based or acrylic adhesive; pressure-sensitive
Release Liner	Silicone-coated paper or film to protect adhesive before application
Optional Additives	UV stabilizers, anti-scratch coatings, anti-static treatment, colored dyes

📐 3. Technical Specifications

Property	Typical Range / Value
Thickness	50–200 µm (0.05–0.2 mm)
Light Transmission	70–90% diffused light (depending on frost density)
Adhesion Strength	8–12 N/25 mm (for pressure-sensitive types)
Operating Temperature	−20°C to +60°C (PVC film)
Service Life	3–8 years (indoor, UV-protected)
Fire Rating	B1/B2 per DIN/EN standards (varies by formulation)
UV Resistance	Good; prevents yellowing under indoor lighting

🎨 4. Appearance & Finishes

Frosted films can be customized with:

Standard Frosted / Sandblasted: Uniform translucent finish
Matte / Soft Frost: Slightly more transparent with soft diffusion
Patterned / Decorative: Geometric, stripes, grids, or company logos
Colored Frosted Film: White, grey, or pastel shades for aesthetic effect
Etched-look: Simulates acid-etched glass

🔧 5. Application Methods Surface Preparation

Clean glass/acrylic surface thoroughly (soap + water, then alcohol)
Remove dust, oil, and grease

Application Techniques

Wet Method
- Spray water with a few drops of detergent on the adhesive side
- Position film and squeegee out air bubbles and water
Dry Method
- Apply adhesive side carefully with squeegee
- Use heat gun to conform around curves or contours (for PVC films)

Edge Finishing

Trim edges with sharp utility knife or plotter
Ensure no air pockets or lifted corners

🌟 6. Functional Benefits

Feature	Benefit
Privacy	Obscures vision while allowing natural light
Cost-effective	Cheaper than sandblasted or acid-etched glass
Removable / Replaceable	Ideal for temporary installations or leased spaces
Customizable	Can print logos, patterns, or gradients
UV Protection	Reduces glare and UV exposure in interiors
Scratch Resistance	Protects glass from minor scratches (for quality films)
Safety	Holds glass shards together if broken (optional PET films